Feed processing equipment is an indispensable key equipment in the development of modern agriculture and animal husbandry. They are widely used in livestock and poultry, aquatic products, cattle, sheep and other breeding industries, and are specifically used to produce the powdery or granular feed required by these animals. These equipment not only improves the production efficiency of feed, but also ensures the quality and nutritional balance of feed, which provides strong support for the development of aquaculture.

In terms of production capacity, feed processing equipment can be flexibly configured to meet the needs of farms of different sizes. The hourly production capacity ranges from 1 ton to 20 tons, covering the entire range from small family farms to large intensive farms. Especially for the production of pellet feed, the equipment can produce a variety of choices of pellet sizes between 1.5mm and 10mm to meet the chewing and digestion needs of different animal species and growth stages.

As an important indicator of equipment performance, the matching power is determined according to the size and configuration of the whole unit. Large production lines are often equipped with higher power motors and drive systems to ensure efficiency and stability in the production process, while small production lines pay more attention to energy saving and cost-effectiveness, using moderate power configuration to achieve full utilization of resources.

The entire feed processing process is designed to be continuous and reasonable, ensuring that every link from raw materials to finished product packaging can be closely connected and operated efficiently. First of all, through the computer control system for intelligent management of the production process, to achieve automatic control and remote monitoring, greatly improving the production efficiency and management level. Subsequently, the raw materials have been accurately fed, improved and safely stored, laying a solid foundation for the subsequent processing process.

In the core processing link, the raw materials will go through multiple steps such as crushing, batching, mixing, granulating, and cooling. The crushing process ensures uniform particle size of raw materials, which is conducive to subsequent mixing and granulation. In the batching process, various raw materials are accurately measured according to the preset formula to ensure the nutritional balance of the feed. The mixing process makes all kinds of raw materials fully and evenly mixed to improve the palatability and utilization rate of the feed. In the granulation process, the mixed raw materials are pressed into granules to facilitate animal feeding, digestion and absorption. In the cooling process, the granule temperature is reduced by air cooling, maintain its quality and stability.

Finally, the cooled pellet feed is lifted again to the packaging process for packaging for storage and transport. Throughout the process, the stand-alone equipment are selected materials and advanced technology manufacturing, stable and reliable performance, easy operation, maintenance is also very convenient. This not only reduces the labor intensity and cost, but also extends the service life of the equipment, which provides a strong guarantee for the sustainable development of the aquaculture industry.